Fisher VCB-3574IR Manuel d'utilisateur

INSTRUCTION MANUALVCB-3574IRB/W CCD Camera About this manualBefore installing and using the camera, please read this manualcarefully. Be sure to keep

MOUNTING THE LENSRewiring the lens cable in the lens iris plug1 Prepare the lens cable.Cut the cable at the plug, then remove approx. 8 mm of the cabl

CONNECTIONSBasic connection for monitoring or recordingThe peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately.1 Make the vid

SETTINGSControl name PositionaElectronic iris (EI)/Backlight compensation(BLC) switchOFFbAuto-iris lens switch (A.I. LENS) DCcLens iris level volume (

SETTINGSLens iris adjustmentIf using a DC type auto-iris lens, you will need to set the LEVEL(VR401) volume when shooting in the conditions described

SETTINGSLine phase adjustmentWhen using a camera switcher to connect 2 cameras or more to onemonitor, there may be a vertical roll of the images when

SPECIFICATIONSScanning system : EIA standard (525 TV lines, 30frames/sec.)Interlace : PLL 2:1 interlaceImage device : 1/2 inch solid state image devic

SANYO INDUSTRIAL VIDEOB/W VIDEO CAMERA LIMITED WARRANTYOBLIGATIONSIn order to obtain warranty service, the product must be delivered to and picked up

Depending on the conditions of use, installation and environment,please be sure to make the appropriate settings and adjustments. Ifyou need help with

Safety GuardTHIS SYMBOL INDICATES THAT THERE AREIMPORTANT OPERATING AND MAINTENANCEINSTRUCTIONS IN THE LITERATURE ACCOMPANYINGTHIS UNIT.WARNING:TO PRE

PRECAUTIONSIn case of problemDo not use the camera if smoke or a strange odour comes from theunit, or if it seems not to function correctly. Disconnec

PARTS NAMES1 Video output connector (VIDEO OUT: BNC type)Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector.2 Line

PARTS NAMES8 Lens mount capThe cap is installed to protect the lens mount section.Remove the lens mount cap before installing a lens (sold separately)

PARTS NAMESConcerning auto-iris lensesDC type auto-iris lensA lens without amplifier circuit that operates only on a DC power source. In general, this

MOUNTING THE LENSPlease use a DC type auto-iris lens (sold separately).Checking the lens mountDo not use a lens if length “L” is more than 7 mm. If no